In the above picture, it's the soap at the front (the one at the back is Castile, 100% olive oil soap). At the time, I didn't have a proper mold and was using a square baking pan lined with plastic wrap (if I remember correctly).
This time, I made one small change to the recipe by adding 5% castor oil; otherwise, it's the same as the above batch. Interestingly, it's a completely different colour!
Even though I'm using the same brand of olive oil pomace as I have for every one of my soaps, this tin seems to have a much greener oil than the previous cans. It's turned the soap a darker colour than the first batch of this soap. Apparently there is no consistency in oil colour from batch to batch.
Right now, I have the mold in the oven to promote gelling. It's a process called CPOP (cold process hot process). I preheated the oven to about 170ºF, then turned the oven off but leaving the light on. Hopefully, this will allow the soap to gel completely.
The recipe this time:
65% Olive oil
30% Coconut oil
5% Castor oil
SF of 5% and the water:lye ratio of 1.5:1 (or 40% lye concentration)
If you're into that kind of thing, it has an INS of 150
In this case, I didn't use water to dissolve the lye, I used full fat coconut milk, 2 chunks of frozen and the remainder refrigerated. It traced quickly and I ended up spooning the last bits on to the top of the soap.
Approximate ready date: November 29 (six weeks)